KD Fasteners, Inc.’s Titanium grade 5 socket set screws are ideal for a variety of industries that require fasteners with more than average strength.
Titanium grade 5 socket set screws also offer light weight, stiffness, and toughness. These socket set screws are resistant to seawater up to 500°F and are shown to last almost two decades in tests of polluted seawater. Additionally, they show no signs of pitting and crevice corrosion even when one mile below the surface. They are also resistant to erosion up to a velocity of 120 feet/second.
Titanium Grade 5 socket set screws are resistant to attack by pure hydrocarbons and most chlorinated and fluorinated hydrocarbons provided there is no acid contamination. They are also fully resistant to solutions of chlorides, hypochlorites, chlorates, perchlorates and chlorine dioxide.
Titanium Grade 5 is 6% aluminum and 4% vanadium.
Titanium Grade 5 Characteristics
- Also knowns as Ti 6AI-4V
- Heat treated to increase strength
- High strength at a lightweight
- Useful formability
- Good corrosion resistance
- Strong in cryogenic temperatures to 800°F
- Twice as strong as Titanium Grade 2
- Lower thermal conductivity than other titanium grades
- Corrosion resistance to salt water and other chlorides
Titanium Grade 5 socket set screws are frequently used in the oil, natural gas, aerospace, and aircraft industries as well as for military application. However, their usefulness extends far beyond these industries.
- Chemical processing
- Sports equipment
- Oilfield components
- Jet engines
- Square drives (Roberson)
- Full dog, half dog
- Nylon tip
- Brass top
- Cone point
- Knurled cup point
KD Fasteners Inc. carries a full line of Titanium Grade 5 socket set screws. They are available in sizes 0-80 to 2 inches. We also manufacture special orders ranging from short runs to large runs of thousands of pieces.
Our Titanium Grade 5 socket set screws are made in America. Contact us today by calling 1-800-736-5014 or filling out our contact form.