Monel 500 socket set screws provide the corrosion resistance of Monel 400 while also adding greater strength and hardness.

Monel 500 is a precipitation-hardenable nickel-copper alloy. It supplies the corrosion resistance of Monel 400 and adds greater strength and hardness. Monel 500 also offers low permeability and is nonmagnetic to temperatures as low as -150°F.

Monel 500 socket set screws offer three times the yield strength and two times the tensile strength of Monel 400 while maintaining the excellent corrosion resistance characteristic of its predecessor. These attributes are obtained by an age hardening process where aluminum and titanium are added to the nickel-copper base and then precipitated throughout the matrix.

Monel 500 socket set screws also have good toughness at high temperatures. They remain corrosion resistant in environments ranging from pure water to non-oxidizing mineral acids, salts, and alkalis. Finally, Monel 500 socket set screws offer excellent resistance to high-velocity sea water and resistance to a sour gas environment.

monel 500 socket set screws Monel 500 Characteristics

Corrosion resistance
Good strength and hardness
Resistant to a sour gas environment
Spark resistant
Non-magnetic to -200°F
Excellent tensile and yield strengths at subzero temperatures

The strength and corrosion resistance of Monel 500 socket set screws make them a great choice for a variety of applications, especially marine.

Applications

Pump shafts
Impellers
Doctors blades and scrapers
Oil and gas production
Electronic components
Sour-gas service applications
Oil well tools and instruments
Marine industry
Cryogenic applications

Drive Options:

Socket
6-lobe
Slotted
Square drives (Roberson)

Point Options:

Cup
Oval
Flat
Full dog, half dog
Nylon tip
Brass top
Cone point
Knurled cup point

KD Fasteners, Inc. carries a full line of Monel 500 socket set screws. They are available in sizes 0-80 to 2 inches. We also manufacture special orders ranging from short runs to large runs of thousands of pieces.