Anchor Bolts
Carriage Bolts
Elevator Bolts
Eye Bolts
Hanger Bolts
Heavy Hex Bolts
Hex Bolts
Hook Bolts
J Bolts
Lag Bolts
Plow Bolts
Rod End Bolts
Stadium Seat Bolts
Tap Bolts
U Bolts
Cap Nuts
Coupling Nuts
Flange-Serrated Nuts
Hex Machine Screw Nuts
Hex Nuts
Hex Slotted Nuts
Metal & Nylon Lock Nuts
Non-Serrated Flange Nuts
Thumb Nuts
Weld Nuts
Wing Nuts
Blind Rivets
Countersunk Rivets
Semi-Tubular Rivets
Solid Rivets
Structural Rivets
Button Socket Cap Screws
Concrete Screws
Deck Screws
Flat Head Socket Cap Screws
Hex Cap Screws
Low Head Socket Cap Screws
Machine Screws
Self-Drilling Screws
Self-Tapping Screws
Sems Screws
Set Screws
Shoulder Socket Screws
Socket Cap Screws
Tapping Screws
Thread Cutting Screws
Thread Forming Screws
Threaded Rods & Studs
Thumb Screws
Wood Screws
Beveled Washers
Flange Washers
Flat Washers
Hardened Washers
Plastic Washers
Shoulder Washers
Lock Washers
Special Washers
Spring Washers
Wave Washers
Dowel Pins
Spring Pins/Roll Pins
Featuring one of the strongest alloys, Inconel 725 heavy hex bolts are high strength fasteners just right for all of your marine applications.
KD Fasteners, Inc.’s Inconel 725 heavy hex bolts are made with a nickel-chromium-molybdenum-niobium age-hardenable alloy that has essentially the same corrosion resistance as Inconel 625. However, this alloy offers twice the strength of Inconel 625. The strength of Inconel 725 is developed by heat treatment to achieve high ductility and toughness. As a result, Inconel 725 is resistant to hydrogen embrittlement and stress-corrosion cracking.
Inconel 725 Characteristics
- Resistant to stress-corrosion cracking
- Resistant to sea water
- Excellent fracture toughness
Applications
- Aircraft
- High-strength marine applications
- Sour gas service
- Chemical processing
- Aerospace
- Oil and gas industries
Inconel 725 Heavy Hex Bolts are custom made with quick turnaround times. Available in standard (inch) and metric sizing. Standard sizes are available up to 4-inch diameter and custom sized diameter is up to 3 ½ inches. Products are made in the USA. Whether you need a standard or custom size, KD Fasteners has a solution for you. Contact us today by calling 1-800-736-5014 or filling out our contact form.