Renowned for resisting heat and corrosion, Titanium Grade 5 can withstand harsh conditions. Keep components together in challenging environments with Grade 5 Titanium threaded rods and studs from KD Fasteners. 

What is a Grade 5 Titanium Threaded Rod?

Essentially, a threaded stud is a relatively long rod threaded on both ends. It works like traditional bolts or screws but has a longer length and broader outside diameter. The threads might extend a specific distance or the entire length of the workpiece.

Titanium Grade 5 threaded rods are suitable for applications that need fasteners with greater length, strength, or rigidity to secure items together in extreme temperatures and oxidative or corrosive conditions. KD Fasteners manufactures them in many sizes, gauges, and load capacities from various material types. 

Titanium Grade 5 Benefits

Like other Titanium types, Grade 5 is strong, lightweight, and corrosion-resistant. What’s unique is its higher strength and yield points with lower ductility. Additional benefits of this material include:

  • High Tensile Strength
  • Resists Corrosion
  • Low Weight
  • Strong Fracture Toughness
  • Stands Up To Chemicals, Hot Gases, Acids, And Oxidating And Alkaline Media

Titanium Grade 5 is easily machinable, making it suitable for manufacturing high-performing fasteners with precise dimensional requirements. 

Threaded Sizes

KD Fasteners can get the job done if you need industrial threaded rods manufactured from Titanium Grade 5 or Titanium Grade 2. As a leading Grade 5 Titanium threaded rods manufacturer, we can provide these fasteners in the desired condition on time and at competitive prices. 

Our team produces threaded rods or studs with various thread sizes from bar stock obtained from reputable suppliers. Compliance is verified upon arrival. 

Typical thread sizes we cut include: 

Metric Sizes:

  • M4
  • M8
  • M10
  • M12
  • M14
  • M16

Standard Sizes:

  • 4-40
  • 6-32
  • 8-32
  • 10-24
  • 10-32
  • 1/4-20
  • 1/4-28
  • 5/16-18
  • 5/16-24
  • 3/8-16
  • 3/8-24
  • 7/16-14
  • 7/16-20
  • 1/2-13
  • 1/2-20
  • 9/16-12
  • 9/16-18
  • 5/8-11
  • 5/8-18
  • 3/4-10
  • 7/8-9
  • 7/8-14
  • 1-8
  • 1-14
  • 1 1/8-7
  • 1 1/8-12
  • 1 1/4-7
  • 1 1/4-12
  • 1 1/2-6
  • Larger diameters are also available

Types of Threaded Rods

We specialize in manufacturing fully threaded studs, double-end threaded rods, and tap-end studs. Here’s what sets them apart. 

  • Fully Threaded Studs: These rods have a thread running the entire workpiece length. This permits nuts to mate at any point along the bar. 
  • Double-End Threaded Rods, Or Double-Ended Threaded Rods: These studs have threads on both ends that don’t run the entire workpiece length. Typically, the threaded segments are equal at both ends.
  • Tap-End Studs: This stud type is similar to double-end rods, but the threaded portion is longer at one end than the other.

If you need industrial threaded studs but aren’t sure which thread type is best, please get in touch with us. With decades of experience, our team can help you make the right choice. 

Industries 

Titanium is utilized in challenging conditions, especially when exposure to high heat, degrading corrosion, and harsh chemicals is a concern. Clients in demanding industries trust us to manufacture Titanium Grade 5 threaded studs. 

Custom Fastening Solutions 

An off-the-shelf product isn’t always best for every application. KD Fasteners specializes in producing custom Titanium Grade 5 threaded rods for specific purposes. 

We work with you to create the best design for your application. Our experts utilize a proven consultative approach to address performance, fitment, longevity, and safety factors. Advanced equipment, highly trained personnel, and expert engineering are combined to produce high-performing fasteners quickly and efficiently. 

Feel free to contact us to learn more about Titanium Grade 5 threaded studs. We’re happy to discuss your needs in greater detail.