Inconel 600 socket cap screws’ ability to maintain strength under high temperatures make them the ideal fastener for airplanes and turbines, but their industrial usefulness goes much further than that.

Also referred to as alloy 600, Inconel 600 is a nickel-chromium alloy with good oxidation resistance at higher temperatures. This material also has good resistance in carburizing and chloride containing environments.

The high nickel content enables Inconel 600 to retain considerable resistance under reducing conditions and makes it resistant to corrosion by a number of organic and inorganic compounds. The nickel content also gives Inconel 600 excellent resistance to chloride-ion stress-corrosion cracking and provides excellent resistance to alkaline solutions.

The chromium content of Inconel 600 gives the alloy resistance to sulfur compounds and various oxidizing environments. As a result, Inconel 600 socket cap screws resist steam and mixtures of steam, air and carbon dioxide.

Inconel 600 Properties

Virtually immune to chloride ion stress corrosion cracking
Good caustic corrosion resistance
Resistant to dry C12 to about 1000°F
Oxidation resistance to 2000°F
Carburization resistance
Non-magnetic
High strength
Heat resistance
Cryogenic to 2000°F
Good resistance to corrosion and heat
Resistant to chloride-ion stress corrosion cracking
Resistant to corrosion by high purity water
Resistant to caustic corrosion

Applications:

Heaters, stills, bubble towers and condensers for processing fatty acids
Evaporator tubes, tube sheets and flaking trays for the manufacture of sodium sulfide
Paper industry
Vacuum furnace fixtures
Chlorination equipment to 1000°F
Titanium dioxide plants
Perchloroethylene syntheses
Magnesium chloride
Barge and tank trucks
Carburizing atmospheres
Ethylene dichloride crackers
Furnace trays, mufflers, hangers
Gasoline stabilizer production
MgCl2 evaporates
Soap manufacture
Titanium dioxide
Vegetable and fatty acid vessels
Other chemical processes
Food processing
Heat treating
Phenol condensers

KD Fastener’s, Inc. supplies both standard (inch) – #2 (.086) to 4 inches – and metric – 2MM to 60 MM – sizing. Products are USA made.

Standard socket cap screw head styles:

Standard socket head cap screw
Button head
Low head
Flat head

Metric socket cap screw head styles:

Standard socket head cap screw
Flange socket head cap screw
- Serrated
- Non-serrated
- Low head socket head cap screw
  - With pilot point

We also supply the hex keys used to install our socket cap screws.

Whatever Inconel 600 socket cap screw you’re looking for, if we don’t have it on our shelf, we can quickly manufacture if for you. We offer short runs to large runs of tens of thousands of pieces. We will custom make your Inconel 600 socket cap screws to your exact specifications. Contact us today by calling 1-800-736-5014 or filling out our contact form.